STAINLESS STEEL POROUS FILTERS

1. MATERIAL: S.S.316L POWDER
2. TECHNICAL DATA:
   1) FILTER GRADES: 0.3μm - 200μm
   2) POROSITY : 28-50%
   3) WORKING TEMPERATURE MAX.: 380 ℃
   4) COMPRESSIVE STRENGTH: 0.5-2.5MPa
   5) PRESSURE DROP: 2.0MPa MAX.
3. ALLOWABLE WORKING ENVIRONMENT: NITRIC ACID, SULPHURIC ATETIC ACID, OXALIC ACID,     PHOSPHORIC ACID, 5% HYDROCHLORIC ACID, LIQUID CHLORINE, LIQUID NITROGEN, SULFURETED     HYDROGEN, ACETYLENE, WATER VAPOUR, HYDROGEN, GAS, CARBON DIOXIDE, ETC..
4. FORMING SHAPES:
1) SEAMLESS TUBES

SEAMLESS TUBES	OD, MM	ID, MM	L, MM
SMALLEST	22	20	50
LARGEST	120	110	1500

A) JOINT TYPE: M12, M20, M30, M40, 215,220,222,226, 228, NPT,  BSP, BSPT, Flanges, other joints as requests.
B) FILTER GRADES: 0.3μm, 0.5μm, 1μm, 3μm, 5μm, 10μm, 20μm, 30μm, 50μm, 80μm, 100μm, 120μm, 150μm, 200μm.

 

2) DISCS

DISCS	D, MM	T, MM
MIN.	5	0.5
MAX.	400	-
FILTER GRADES: 0.3μm, 0.5μm, 1μm, 3μm, 5μm, 10μm, 20μm, 30μm, 50μm, 80μm, 100μm, 120μm, 150μm, 200μm.

 

 

3) SHEETS

SHEETS	W x L ，MM	T, MM
	5*5 MIN.	0.5MIN.
	280*280 MAX.	-
FILTER GRADES: 0.3μm, 0.5μm, 1μm, 3μm, 5μm, 10μm, 20μm, 30μm, 50μm, 80μm, 100μm, 120μm, 150μm, 200μm.